HOME  |   FEEDBACK  |   SITE MAP  |   CONTACT     
About VoV | Information Centre | Services | Search Data | News | Contact Us |
  Welcome to VOV Certification & Testing Laboratory Limited
   You are here: VOV  / Information Centre  / Lighting Tester IEC 598
Lighting Tester IEC 598           
 
  • conform to CE, acc. to EN 50 191
  • 5 in 1 tester: CT, PE, IS, HVDC, FT
  • micro processor controlled
  • menu controlled test programme creation
  • printer and remote control interfaces
  • 100 programmes with 300 steps per programme
  • PC software
  • Lighting testers PI 3301K and KT 3301D combine the protective conductor, insulation and high voltage test in one device and thus allow tests in accordance with many standards (IEC, EN, UL, BS, VDE, etc.) In addition a function test can be performed with device KT 3301D. The design of these testers meets all the necessary requirements, i.e. from hand operation to automatic protocolling to a fully automatic system application. Software packages for remote control support complete concepts as well as OEM users.
    Special attention has been paid to easy operation using a multiple line LC-display and function keys with plain text. There is a programme storage for 100 programmes with 300 steps per programme available. The included WINDOWS software allows the creation and loading of test programmes on your PC. Via a simple WINDOWS software programme (optional) remote control by PC is possible. The printer interface allows standard protocols of all parameters as well as of the test and measurement results.
    Contrary to almost all of the other devices offered there is an automatic change-over between the high voltage test and the low voltage tests. As the function test (KT 3301D) is also automatically applied to the DUT, it has to be connected only once.




     

      Data
      3301K
      3301E
      function test
        - potential
      ----
      0 - 400 VAC / 16 A
      power supply
      high voltage test DC
        - potential
      2200 VDC / 3 mA
      free
      insulation test
        - potential
      500 VDC / 50 MOhm
      free
      earth bondtest
        - resistance measurement (EN 60 335)
        - voltage meaurement(EN 60 204)
        - no-load voltage
      10 - 30 AAC
      0 - 0,5 Ohm
      0 - 4 VAC
      6 V and 12 V
      continuity test
      24 VDC / 0,6 A
      plug-in
      19" / 4 HU
      19" / 5 HU
      power supply
      230 V / 50 Hz or 115 V / 60 Hz



    Special features:

    • conform to CE, in accordance with EN 50 191
    • 4 or 5 in 1 tester
    • fully automatic test run
    • internal change-over for all tests with single connection of DUT
    • dwell time 0.1 up to 99.9 seconds
    • visual and audible alarm
    • Window comparator for setups
    • micro processor controlled
    • 50/100 programmes with 300 steps per programme
    • internal clock / calendar
    • LC display with 4 * 20 characters
    • PLC remote control interface
    • PLC memory recall interface
    • PC remote control interface
    • PC setup software included


    Optional:

    • PC remote control software
    • IEEE interface
    • insulation measurement 1000 VDC / 1 GOhm


    Accessories:

    • connecting adapter
    • protective conductor probe
    • test dummy