HOME  |   FEEDBACK  |   SITE MAP  |   CONTACT     
About VoV | Information Centre | Services | Search Data | News | Contact Us |
  Welcome to VOV Certification & Testing Laboratory Limited
   You are here: VOV  / Information Centre  / Machine Tester EN 60204
Machine Tester EN 60204           

  • conform to CE, acc. to EN 50 191
  • 4 in 1 tester: PE, IS, HVDC, HVAC
  • micro processor controlled
  • menu controlled test programme creation
  • printer and remote control interfaces
  • 100 programmes with 300 steps per programme
  • PC software

Our machine tester PM 3301 / S 3301 allows safety end tests in accordance with EN 60 204. Special attention has been paid to easy operation using a multiple line LC display and function keys with plain text. The test result is displayed visually by large PASS / FAIL indicators.
There is a programme storage for 100 programmes with 300 steps per programme available. The included WINDOWS software allows the creation and loading of test programmes on your PC. Via a simple WINDOWS software programme (optional) remote control by PC is possible. The printer interface allows standard protocols of all the parameters as well as of the test and measurement results.
Contrary to almost all of the other devices offered there is an automatic change-over between the high voltage test and low voltage tests - thus requiring only a single connection of the DUT.




Data
PM 3301D
PM 3301E
S 3301
high voltage test AC

  - transformer capacity
  - short circuit current
  - potential
---
---
0,2 - 2,5 kV / 100 mA
0,5 - 5 kV / 100 mA (option)
500 VA
200 mA
free
high voltage test 1500 DC
  - potential
---

1500 VDC / 4 mA
free
insulation measurement
  - potential
500 VDC / 50 MOhm
free
earth bond test
  - resistance measurement (EN 60 335)
  - voltage measurement (EN 60 204)
  - no-load voltage
10 - 30 AAC
0 - 0,5 Ohm
0 - 4 VAC
6 V or 12 V
housing / plug-in
housing 14" / 3 HU
plug-in 19" / 5 HU
power supply
230 V / 50 Hz or 115 V / 60 Hz


Special features:

  • conform to CE, in accordance with EN 50 191
  • 4 in 1 tester
  • fully automatic test run
  • internal change-over for all tests with single connection of DUT
  • dwell time 0.1 up to 99.9 seconds
  • visual and audible alarm
  • Window comparator for setups
  • micro processor controlled
  • 50/100 programmes with 300 steps per programme
  • internal clock / calendar
  • LC display with 4 * 20 characters
  • PLC remote control interface
  • PLC memory recall interface
  • PC remote control interface
  • Anschluss fr Warnleuchten (nur S 3301)
  • PC setup software included


Optional:

  • PC remote control software
  • IEEE interface
  • high voltage test 5 kVAC (S 3301 only)


Accessories:

  • transport carriage
  • hand operation unit for remote control
  • protective conductor probe
  • high voltage test pistol with 5 m of connecting cable
  • warning / signal lamp set
  • cable for power main connection to DUT
    - clamp-type terminal
    - CEE 16 A
    - CEE 32 A
  • test dummy